Water Heater Sudden Shutdown: Taking the Correct Measures
Water Heater Sudden Shutdown: Taking the Correct Measures
Blog Article
Every person may have their unique piece of advice on the subject of How to Troubleshoot and Repair an Electric Water Heater.
Many modern-day residences use an electric water heater for their heating system, due to its ease and also simplicity of use. Nevertheless, similar to any other electric appliances, troubles may emerge with its use, suddenly. It can be truly discouraging to awaken to a cold shower instead of a hot one or having your bath with water that isn't hot sufficient or even also warm. Whatever the case may be, hot water heater issues can be rather aggravating. The good news is, we've made a checklist of feasible solutions to your hot water heater problems. There are a number of factors that can cause a number of these problems, it could be a concern with the power supply, the electrical burner, or the thermostat. Before doing anything, ensure you switch off the primary power supply for safety and security. Whatever the trouble is, getting it dealt with need to not present excessive of an issue if you follow these actions:
Call An Expert:
If after replacing all faulty components and resetting your temperature level, the hot water heater still isn't working, you might need to call an expert plumber for a specialist viewpoint. The trouble with your heating unit could be that the cold and hot taps have been switched over or it may be undersized for the quantity of warm water needed in your home. Whatever the instance may be, an expert plumber would certainly aid solve the issue.
Examine Your Power Supply:
As standard as this might appear, it is extremely needed. Without sufficient power, your hot water heater will not operate. So the first thing to do when your water unexpectedly stops working is to verify that it isn't a power issue. Inspect if the fuse is burnt out or the circuit breaker stumbled. If the breaker is the issue, merely turn it off and on once again. Change any type of broken or worn-out fuse. Examine the appliance with power after these changes to see if it's now functioning.
Inspect Your Thermostat:
If your water heater still isn't working or the water appearing isn't hot enough, you might need to examine the temperature level settings on your top thermostat. Guarantee the circuit breaker is turned off before doing anything. Open up the access panel and also press the red button for temperature level reset above the thermostat. This must help heat up the water. Turn the circuit breaker back on and also check if the issue has actually been solved.
Check the Heating Element in the Hot Water Heater:
If it's not a power trouble, then try checking out your heating element if it is still working. Check each of your burner to be sure the issue isn't with any of them. If any of them is defective, replace that part and after that examine whether the hot water is back on.
Conclusion
Hot water heater troubles are not always significant. Many of them are because of minor problems like a blown fuse or worn-out burner. Changing the damaged parts should work. Nevertheless, if you are still unable to address the trouble, give a call to your local plumber ahead to get it fixed.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I'm certainly very excited about Hot Water Heater Repair and I hope you enjoyed reading my article. In case you liked our blog post kindly don't forget to share it. Thank you so much for going through it.
Burst issue? Contact. Report this page